Wet and Electric Underfloor Heating across Hampshire – Even Warmth from Specialist Installers
Want radiator-free walls in your Hampshire home? We can connect you with underfloor heating installers throughout the county who design and fit wet and electric systems for single rooms, extensions and whole floors. Underfloor heating is easiest to fit when a floor is being laid or replaced, so it's worth bringing an installer in while the building plans are still being finalised.
Where Underfloor Heating Works Well in Hampshire Homes
- Single-storey kitchen and dining extensions with bifold or sliding doors
- Open-plan ground floors with little wall space for radiators
- Bathrooms and en suites with tiled or stone floors
- Barn conversions and older properties being renovated
- Self-builds and new homes designed around a heat pump
- Conservatories and garden rooms that feel cold underfoot
What Our Hampshire Installers Offer
- Screeded wet systems – pipes laid over insulation and covered in screed
- Low-profile wet systems – thin boards for renovations with limited floor height
- Joisted floor systems – spreader plates or boards between timber joists
- Electric mats and cables – for bathrooms, kitchens and small rooms
- Manifolds and mixing units – connecting wet systems to the boiler or heat pump
- Room thermostats and zoning – including smart controls
- Heat loss design – pipe spacing and output matched to each room
Hampshire Underfloor Heating Prices
Prices across Hampshire vary with the floor area, whether the system is wet or electric, the floor construction and whether screed and finishes are included. As a guide:
| Project | Typical price (inc. VAT) |
|---|---|
| Electric mat in a bathroom | £1,000 – £2,000 |
| Wet system in a kitchen extension | £2,500 – £4,500 |
| Wet system across a whole ground floor | £4,500 – £7,500+ |
Screed, tiling and flooring are often quoted separately, so confirm what's in each price before comparing.
Regulations and Local Guidance in Hampshire
Underfloor heating inside an existing home doesn't need planning permission. If it's part of an extension, the extension will need building regulations approval, including suitable floor insulation. Electric systems needing a new circuit are notifiable electrical work and should be fitted by a registered electrician. Check local planning and building control guidance on the Hampshire County Council website.
Why Compare Underfloor Heating Quotes With Us
- Installers experienced in wet and electric systems across Hampshire
- Designs based on heat loss, not guesswork
- Clear quotes showing insulation, pipe or mat, manifold and controls
- Advice on floor finishes and screed drying times
- Free quotes with no pressure
Before pipe or mats go down, the installer should check insulation, available floor height, heat loss and the final floor finish. Wet systems need manifold and mixing arrangements where appropriate; electric mats need suitable electrical protection and testing.
Common questions from homeowners
Do you have underfloor heating installers across Hampshire?
The network includes installers who work in Hampshire, though availability varies by postcode and project. Enter your details to check for a match.
Can underfloor heating run from my existing boiler?
Usually, yes. A wet system connects to the boiler through a manifold with its own pump and mixing valve. Your installer will check the boiler has enough spare output for the extra area.
What floor finishes work with underfloor heating?
Tiles, stone and polished concrete work best. Engineered wood, laminate, vinyl and carpet can all be used, but check the manufacturer's maximum temperature and keep carpet and underlay to a low combined tog rating.
Is underfloor heating suitable for a heat pump?
Yes. Underfloor heating works at low water temperatures, which suits heat pumps well and helps them run efficiently.